Bytecc USA 0 0 17.4700 add-to-cart Bytecc USA None Black USB 2.0 to IDE Adapter Features:ģ.5" Desktop Drives (works with all brands, including Maxtor, Seagate, IBM, Hitachi, Samsung, Western Digital and etc)Ĭonnect any device with an IDE Interface to a PC with USB interfaceīackwards compatible to USB 1. Your new Quadra-Fire wood burning fireplaceRe: Bytecc USB 2.0 to IDE/SATA Adapter Kit - BT 300 Be sure the drive is spinning - if it s not, you will need a. The adapter supports all existing IDE/ATAPI devices such as Iomega Zip, CD-ROM, CD-RW, DVD-ROM and IDE hard drives. The Hi-Speed USB interface provides for easy installation with its Plug and Play design. Easily transfer files from computer or notebook, back up files, or store large file archives on hard drives. The USB 2.0 to IDE Drive Adapter turns any IDE drive into a convenient external drive. The USB 2.0 to IDE Drive Adapter implements a bridge between one USB port and one ATA or ATAPI based mass storage device port. If you still can not access the drive and its contents, at this stage you will need to seek further professional help.3020 Bytecc USB 2.0 to IDE Adapter, Works with 2.5", 3.5" HDD and 5.25" CD/DVD Drive 24.95 24.9500 USD InStock /Peripherals/Hubs, Cards & Accy The USB 2.0 to IDE Drive Adapter implements a bridge between one USB port and one ATA or ATAPI based mass storage device port. If not detected by Windows, double check jumper settings and then Drive Mgmt Console. If so, save and reboot to Windows (or other). Make sure BIOS detects the drive and registers its size correctly. Once installed, power up the PC, ready to intercept the loading of the OS by hitting the proper key to enter the BIOS setup utility. Make sure the jumpers are properly configured for installation into the specific PC you are connecting it to. If not, refer to next item.Ĥ.) If Disk Management Console detected the drive but was unable to initialize it, remove the drive from the adapter. If one is found, attempt to initialize it. For desktop drives and SATA notebook drive, you will need to connect the power adapter. Connecting a Bytecc BT-300 IDE/SATA to USB adapter. Plug the HDD into the reader first, then plug in the USB. My Inspiron m laptop hard drive failed and I bought the adapter kit to see if I. For IDE notebook drives, all you need to do is connect the HDD to the adapter and plug in the USB. Then refer to item 1.ģ.) Drive still not detected? Check the Disk Management Console for a drive needing to be "Initialized". It'll connect to the IDE connector on the adapter. On some systems, the detection (and ensuing driver installation) of the USB adapter can take an unusually long time.Ģ.) Especially in scenarios where drives are swapped around in varying scenarios, connect the USB adapters plug to a different port. Here are a few issues/resolutions I have encountered with them regarding the systems failure to detect the drive.ġ.) Wait. had a good read of previous suggestions around similar problems or topicsĪs an alternative - if I cant make this work I would be interested in recommendations of UK based harddrive recovery firms that I could post this to and get the data by mailed back to me on a USB stick. trying to connect to an iMac using MacOS to see if that was more successful changing the jumper settings from Master to Cable Select all connected at reboot, connect the adaptor only at reboot then the drive afterwards, etc rebooting and reconnecting the components in different orders, i.e. The connector seems to connect to the IDE fine. The drive spins & powers up, but the USB device doesnt seem to be recognised. So I can see nothing in Disk Management in the Computer Management application and the drive doesnt seem to be recognised. However, when I came to repeat this with the older Fujitsu MPF3014AT 20Gb drive the drive isn't recognised. The drivers were identified installed and it worked simply as I had expected based on the Youtube videos etc I had read. I am using a laptop running Windows 7 (Home edition). I bought a USB IDE/SATA adaptor and easily accessed the Western Digital WD1600 drive. I have two old IDE harddrives that I was looking to access some data from.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |